RC Screwz Traxxas Bandit XL-5 Stainless Steel Screw Kit

This is the RC Screwz Traxxas Bandit XL-5 Stainless Steel Screw Kit. RCScrewZ Stainless Screw Kits are the best way to beef up the hardware throughout your RC vehicle in one convenient package. Your new kit will include everything needed to do a full conversion and more. Stainless Steel Screw Kits are far superior to the screws that come stock with your RC. These kits are made with the best stainless steel money can buy. No more bent, rusted, or corroded screws. Never worry about stripped heads again. You will not find a better screw kit for your RC at any price!

Kits include:

• All socket screws + Extras
• Button Screws + Extras
• Flat Head Screws + Extras
• Set Screws + Extras
• Nuts + Extras
• Washers + Extras
• Bondhus Short Arm hex Wrenches All Sizes
• Quality Reusable plastic pit case.
• Toleranced/Shoulder Screws (such as shock mounts) are not included

General Screw Installation & Notes: Use either a wax or grease on the threads to help prevent stripping while going into new or hard material. Some screws that are included in the kits remain Phillips heads but are still stainless steel. This is done for strength, as a result of field testing, on small diameter screws (2mm and 2-56″ dia). This may include some chassis screws and differential screws. All other remain socket head. Some uncommon lengths need to be trimmed by user (example: for a 28mm length – 30mm screws are included and can be trimmed down to 28mm). If trimming is required, we recommend threading a nut on the screw, using a Dremel or cutoff tool and trimming screw to length, and them removing nut to clean the threads for use. Please refer to your assembly manual for screw locations.