Hot Racing Hardened Steel 50T 0.8 Mod 32P Spur Gear for Slash 2WD, Stampede 2WD, Rustler, Bandit

This is the Hot Racing Hardened Steel 50-Tooth 0.8 Mod 32-Pitch Spur Gear for Traxxas Slash 2WD, Stampede 2WD, Rustler, Bandit, and Telluride vehicles. This gear is significantly smaller than stock, which will increase top speed over stock. It will work with XL-5 brushed and VXL brushless trucks with proper setups. Due to the smaller diameter, it will require a large pinion gear than stock for proper fit. This gear requires running a 0.8 Mod 32-pitch pinion gear.

FEATURES:
– CNC machined and lightened hardened steel construction
– Replaces stock nylon spur gear
– Rugged 0.8 Module/32-pitch teeth for total reliability on brushless power
– Black oxide coated gear for durability and corrosion resistance
– Orange anodized countersunk aluminum washers
– High strength hardware

YOU WILL RECEIVE:
– One (1) 50 tooth 32 pitch (0.8 Mod) spur gear
– Three (3) mounting screws
– Three (3) orange anodized countersunk washers
– Three (3) washers (use as needed underneath countersunk washers to prevent screw ends from protruding too far through spur backing plate)

REQUIREMENTS:
– Hardened .08 module (32 pitch) steel pinion gear

SPECIFICATIONS:
– Number of Teeth: 50
– Gear Pitch: 32 pitch (0.8 module)
– Mounting Holes: 3
– Tooth Face width: ~5mm

COMMENTS:
– Must use with .08 module (32 pitch) pinion gear
– Motor should no way exceed 180F. ESC should not exceed 160F. Excessive temperatures will shorten the life of the motor and ESC.